Tactical Training & Gear

Nibh laboriosam maecenas minim blandit, rerum laboris

GALLERY

TACTICAL GEAR

Below our featured Tactical Gear

Bulletproof Vest

Flip for back

Bulletproof Vest

Available in
(Green/Black/Grey/Coyote)

Bulletproof vest with fixed pouches to front of vest, Ballistic soft & hard armour capability. Internal poly cotton material used for comfort and moisture management. Shoulder adjustment via Velcro webbing adjustment straps.

Specifications:

  • Front constructed with stitched on pouches (Standard 9mm, radio
    and holster)
  • Internal fabric poly cotton for comfort
  • Velcro straps on shoulders for height adjustment
  • Overlapping side panels with Velcro closure and adjustment
  • Additional pouches can be attached to vest (9mm magazine, rifle
    magazine, pepper spray, torch, stun grenade, smoke grenade)
  • Ballistic soft & hard armour capability
  • Pouch closure could be done via Velcro lid, side-release buckles,
    elasticated bungee
  • Sizes S-M, L-XL, 2XL-3XL

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Zippers, Velcro and attachment buckles
    • High tenacity polyester webbing
    • 180 gram poly cotton inner material

Plate Carrier Molle

Flip for back

Plate Carrier Molle

Available in
(Green/Black/Grey/Coyote)

Plate carrier complete with Molle attachment system front and back, Ballistic soft and hard armour capability. This carrier is used mainly by adding Molle pouches as required by operations or individuals. Internal Spacer material used for comfort and ventilation. Reinforced drag handle with shoulder adjustment. Steel d-ring rifle attachment points left and right. 4 x adjustable shoulder straps for securing water bladder pipe and radio equipment and cables.

Specifications:

  • Molle base front and back for versatile pouch fi tment and positioning of equipment and ammunition (This carrier does not have any Velcro for securing pouches)
  • Molle back for attaching pouches & hydration pack
  • Internal fabric Spacer for added ventilation
  • Reinforced Drag handle bar-tacked for extra strength
  • Molle adjustable side panels accommodating sizing (S-M, L-XL, XXL)
  • Molle side panels constructed using only webbing straps or fitted with spacer material for extra comfort or when side armour plates are attached on external pouches
  • Side panel adjustment using 3 x ladder lock buckle system
  • In-field repair kit available for replacing elastic, buckles and cord locks
  • Shoulder pads constructed with spacer material and high density foam for additional comfort
  • Velcro patches in front for blood type identifi cation/name tags
  • Sizes (S-M, L-XL, XXL)

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Zippers, Velcro and attachment buckles
    • High tenacity polyester webbing

Plate Carrier Rig

Flip for back

Plate Carrier Rig

Available in
(Green/Black/Grey/Coyote)

Plate carrier rig complete with Molle/Velcro attachment system. Pouch confi guration and sizing can be customised to operator specification. Equipment pouches closure via elasticated bungee, Velcro lid, Zip or side-release buckle.

Specifications:

  • Molle & Velcro base front for securing and positioning of equipment and ammunition
  • Inner Velcro cover used for quick release (Rig attached via 4 x side-release buckle system
  • Securing rig to carrier when removing Velcro cover (minimising operational movement)
  • Rig fitted with 6 x rifle magazine pouches, 2 x 9mm pouches and 1 utility pouch
  • 2 x front rifle magazine pouches closed via Velcro top closure
  • 4 x back rifle magazine pouches fitted with elasticated pull tab closure
  • 2 x 9mm magazine pouches fitted with elasticated pull tab closure
  • 1 x utility pouch closes via elasticated compression system with cord lock
  • In field repair kit available for replacing elastic and cord locks
  • Sizes – One size

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Cord lock, Velcro and attachment buckles
    • 3.5mm Bungee/elastic cord (Heavy duty)
    • High tenacity polyester webbing

Plate Carrier

Flip for back

Plate Carrier

Available in
(Green/Black/Grey/Coyote)

Plate carrier complete with Molle/Velcro attachment system front and Molle back, Ballistic soft and hard armour capability. Internal Spacer material used for comfort and ventilation. Reinforced drag handle with shoulder adjustment. Steel d-ring rifle attachment points left and right. 4 x adjustable shoulder straps for securing water bladder pipe and radio equipment and cables.

Specifications

  • Molle & Velcro base front for versatile pouch fi tment and positioning of equipment and ammunition
  • Molle back for attaching pouches & hydration pack
  • Internal fabric spacer for added ventilation
  • Reinforced drag handle bar-tacked for extra strength
  • Molle adjustable side panels accommodating sizing (S-M, L-XL, XXL)
  • Molle side panels constructed using only webbing straps or fitted with spacer material for extra comfort or when side armour plates are attached on external pouches
  • Side panel adjustment using 3 x ladder lock buckle system
  • Ammunition & equipment rig attached to front using 4 side-release buckle system for quick change over capabilities or secured via Velcro base (minimising operational movement)
  • Carrier fitted with Molle front and back for attaching various Molle pouches (Radio, 9mm and rifle ammunition, Medical, Utility)
  • In-field repair kit available for replacing elastic and cord locks
  • Shoulder pads constructed with spacer material and high density foam for additional comfort
  • Velcro patches in front for blood type identifi cation/name tags
  • Sizes (S-M, L-XL, XXL)

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Zippers, Velcro and attachment buckles
    • High tenacity polyester webbing

Tactical Urban Vest

Flip for back

Tactical Urban Vest

Available in
(Green/Black/Grey/Coyote)

Tactical vest complete with Molle attachment system front and back, Ballistic soft armour capability. Internal mesh material used for comfort and ventilation. Reinforced drag handle with shoulder adjustment via Velcro webbing adjustment straps.

Specifications

  • Molle base front and back for versatile pouch fi tment and positioning of equipment and ammunition
  • Internal fabric mesh for added durability when warn over bullet-proof vest.
  • Reinforced Drag handle bar-tacked for extra strength
  • Front zip closure for quick and easy fitment.
  • Velcro straps on shoulders for height adjustment
  • Overlapping side panels with 3 x ladder lock buckles on both sides for maximum adjustment and comfort.
  • Molle pouches fitted to vest (9mm magazine, rifle magazines, Pepper spray, torch, stun grenade, smoke grenade, radios)
  • 2 x Internal front zip closure pouches
  • Sizes S-M, L-XL, 2XL-3XL

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Zippers, Velcro and attachment buckles
    • High tenacity polyester webbing
    • Heavy duty polyester mesh

Plate Carrier Rig

Flip for back

Plate Carrier Rig

Available in
(Green/Black/Grey/Coyote)

Tactical vest complete with Molle/Velcro attachment system front and back, Ballistic soft and hard armour capability. Internal Spacer material used for comfort and ventilation. Reinforced drag handle with shoulder adjustment via Double slot buckle system. Steel d-ring rifle attachment points left and right. 4 x adjustable shoulder straps for securing water bladder pipe and radio equipment and cables.

Specifications

  • Molle & Velcro base front and back for versatile pouch fitment and positioning of equipment and ammunition
  • Internal fabric Spacer for added ventilation
  • Reinforced Drag handle bar-tacked for extra strength
  • Internal elasticated/Velcro strap for secure fitment
  • Overlapping side panels for maximum adjustment and protection on sides
  • Plate Carrier Rig compatible
  • Sizes S-M and L-XL

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Zippers, Velcro and attachment buckles
    • Gun coated Domex buckles
    • High tenacity Polyester webbing

Leg holster Ambidextrous

Flip for back

Leg holster Ambidextrous

Available in
(Green/Black/Grey/Coyote)

Leg holster manufactured to fit most hand weapons with ambidextrous capabilities. Each operator can position Velcro holster as required. Inner rubberized panel opens into a pouch. Inner holster can be removed and used separately on a tactical belt with ambidextrous capabilities. Holster carrier can be used as a leg rig with holster compartment being empty and additional Molle pouches attached to outer Molle panel.

Specifications:

  • Main holster compartment to fit removable Velcro holster with ambidextrous capability
  • Molle front for securing and positioning of equipment and ammunition Molle pouches
  • Inner material to leg is rubberized mesh for extra grip (minimizing operational movement)
  • 2 x 50mm elasticated webbing straps with side-release buckle closure
  • Tactical belt to holster quick release system
  • Sizes – One size (Ambidextrous)

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Velcro and attachment buckles
    • High tenacity polyester webbing
    • Heavy duty elastic

Leg Rig – Drop Leg Mag Pouch

Flip for back

Leg Rig – Drop Leg Mag Pouch

Available in
(Green/Black/Grey/Coyote)

Leg rig manufactured to carry various operational equipment. Inner top loading leg pouch with zip closure for carrying additional ammunition.

Specifications:

  • Main compartment Zip closure to fit ammunition or equipment
  • Front constructed with various pouches to fit equipment and ammunition (Leg rig comes standard with 4 pouches)
  • Inner material to leg is rubberised mesh for extra grip (minimising operational movement)
  • 2 x 50mm elasticated webbing straps with side-release buckle closure
  • Front pouches closure as per operator requirement – Velcro lid, side release buckles, elasticated bungee.
  • Tactical belt to leg rig quick release system
  • Sizes – One size (Ambidextrous)

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Velcro and attachment buckles
    • High tenacity polyester webbing

Leg Rig

Flip for back

Leg Rig

Available in
(Green/Black/Grey/Coyote)

Leg rig manufactured to carry various operational equipment. Pouches could be custom made to operator requirements.

Specifications

  • Front constructed with various pouches to fit equipment and ammunition (Leg rig comes standard with 4 pouches)
  • Inner material to leg is polyester 1000D Waterproof.
  • 1 x 50mm elasticated webbing strap with side-release buckle closure
  • Front pouches closure as per operator requirement – Velcro lid, Side-release buckles, elasticated bungee.
  • Tactical belt to leg rig Velcro adjustable webbing.
  • Sizes – One size (Ambidextrous)

 

  • Materials used
    • 1000D Polyester complete with PU waterproof coating
    • YKK Velcro and attachment buckles
    • High tenacity polyester webbing